Amtjets Support Website in Taiwan

首頁
翱翔天際
Mercury HP
Pegasus HP
Olympus HP
Titan
Nike
Optional Equipment
Olympus university
Turbines compared
Complete package
Version 2 ECU

Welcome to the website of Amtjets' distributor in Taiwan

 

點選 CDN雲端快速鏡像網站 加速您的瀏覽體驗

 

UAV引擎 無人飛行載具引擎 無人飛機系統引擎 無人飛機設計競賽用引擎 渦輪引擎 噴射引擎,直徑20cm 長度54cm 推力80Kg (Nike) complete gas turbine kits。

Advanced Micro Turbines 於1991年,起源於荷蘭,從1994年中開始製造商用渦輪機。

AMT擁有超過20年的經驗,在高性能和噴氣動力飛機的引擎研製和測試

 

我們給您足夠的推力,您帶著您的想像翱翔天際 (AMTJET)

 

Contact Us!點我立即連絡!

 

Mercury HP Pegasus HP Olympus HP Titan
Nike Optional Equipment Spare parts Mercury HP Spare parts Pegasus HP
Spare parts Olympus HP Spare parts Titan Sundries 

 

Engines (complete kit)

Mercury HP (All Mercury HP engines have "propane" start system.)

Mercury HP airstart

 

Mercury HP airstart + Engine Data Terminal.

 

Mercury HP Electric start.

** Mercury HP E-start set contains ** 
1 x Fully tested Mercury HP E-start gasturbine. 
1 x Version 2.0 Electronic Control Unit. 
1 x CTF switch harness to program ECU. 
1 x Solenoid valve for kerosene. 
1 x Solenoid valve for gas. 
1 x Mercury fuel pump. 
1 x Rear engine mount. 
1 x Front engine mount + EGT sensor mount. 
1 x 4 cell 2500Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Glowplug connector. 
1 x Thermo sensor ( K-type). 
1 x Glowplug wrench. 
1 x Glow plug Rossi 8 (spare). 
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II). 
1 x Manual Mercury HP E-start. 
2 x Sticker. 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x Festo fuel filter.

 

Mercury HP Electric start including gas container.

** Mercury HP E-start set contains **
1 x Fully tested Mercury HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Mercury fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Mercury HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Propane internal gas container.

 

Mercury HP Electric start including Engine Data Terminal.

** Mercury HP E-start set contains **
1 x Fully tested Mercury HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Mercury fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Mercury HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Engine Data Terminal.
1 x EDT charge cable.

 

Mercury HP Electric start including gas container and Engine Data Terminal.

** Mercury HP E-start set contains **
1 x Fully tested Mercury HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Mercury fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Mercury HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Propane internal gas container.
1 x Engine Data Terminal.
1 x EDT charge cable.

 

Pegasus HP (All Pegasus HP engines have "propane" start system.)

Pegasus HP airstart

 

Pegasus HP airstart + Engine Data Terminal

 

Pegasus HP Electric start.

** Pegasus HP E-start set contains **
1 x Fully tested Pegasus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Pegasus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Pegasus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.

 

Pegasus HP Electric start including gas container.

** Pegasus HP E-start set contains **
1 x Fully tested Pegasus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Pegasus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Pegasus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Propane internal gas container.

 

Pegasus HP Electric start including Engine Data Terminal.

** Pegasus HP E-start set contains **
1 x Fully tested Pegasus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Pegasus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Pegasus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Engine Data Terminal.
1 x EDT charge cable.

 

Pegasus HP Electric start including gas container and Engine Data Terminal.

** Pegasus HP E-start set contains **
1 x Fully tested Pegasus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Pegasus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Pegasus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Propane internal gas container.

 

Olympus HP (Olympus E-start engines are available with propane or kerosene starting system.)

Olympus HP airstart

 

Olympus HP airstart + Engine Data Terminal

 

Olympus HP Electric start.

** Olympus HP E-start set contains **
1 x Fully tested Olympus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Olympus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Olympus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.

 

Olympus HP Electric start including gas container.

** Olympus HP E-start set contains **
1 x Fully tested Olympus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Olympus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Olympus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Propane internal gas container.

 

Olympus HP Electric start including Engine Data Terminal.

** Olympus HP E-start set contains **
1 x Fully tested Olympus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Olympus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Olympus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Propane internal gas container.
1 x Engine Data Terminal.
1 x EDT charge cable.
 

Olympus HP Electric start including gas container and EDT.

** Olympus HP E-start set contains **
1 x Fully tested Olympus HP E-start gasturbine.
1 x Version 2.0 Electronic Control Unit.
1 x CTF switch harness to program ECU.
1 x Solenoid valve for kerosene.
1 x Solenoid valve for gas.
1 x Olympus fuel pump.
1 x Rear engine mount
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Glowplug connector.
1 x Thermo sensor ( K-type).
1 x Glowplug wrench.
1 x Glow plug Rossi 8 (spare).
1 x Turbine Oil 1 Ltr ( Aeroshell 500 or Mobil Jet Oil II).
1 x Manual Olympus HP E-start.
2 x Sticker.
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Festo fuel filter.
1 x Propane internal gas container.
1 x Engine Data Terminal.
1 x EDT charge cable.

 

Complete engine set Olympus HP E-start. (kerosene start)

The complete set contains
1 x Fully tested Olympus HP E-start gasturbine with kerosene start system.
1 x Version 2.0 b Electronic Control Unit.
1 x High flow main solenoide valve for kerosene.
1 x High flow fuel solenoide valve for ignitor.
1 x Olympus HP fuel pump.
1 x Rear engine mount.
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Thermo sensor (K-type).
1 x Manual Olympus HP E-start (kerosene).
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Fuel filter.
1 x Festo T piece for ignitor feed.

 

Complete engine set Olympus HP E-start + EDT. (kerosene start)

 

The complete set contains
1 x Fully tested Olympus HP E-start gasturbine with kerosene start system.
1 x Version 2.0 b Electronic Control Unit.
1 x High flow main solenoide valve for kerosene.
1 x High flow fuel solenoide valve for ignitor.
1 x Olympus HP fuel pump.
1 x Rear engine mount.
1 x Front engine mount + EGT sensor mount.
1 x 4 cell 2500Mah Lithium Polymer battery pack.
1 x Battery pack charge cable.
1 x Safety clip for RPM sensor.
1 x Thermo sensor (K-type).
1 x Manual Olympus HP E-start (kerosene).
1 x 3 meter Festo PP3 tube.
1 x 2 meter Festo PP4 tube.
1 x Fuel filter.
1 x Festo T piece for ignitor feed.
1 x Engine Data Terminal.
1 x EDT charge cable.
 

Titan (Titan E-start engines are available with propane or kerosene starting system.)

Complete engine set Titan Air-start. (propane start)

 

The Titan Air-start set contains the following:
1 x Fully tested Titan Air-start gasturbine. 
1 x Version 2.0 b Electronic Control Unit. 
1 x Solenoid high flow valve for kerosene. 
1 x Solenoid high flow valve for gas. 
1 x Titan fuel pump. 
1 x Rear engine mount. 
1 x Front engine mount + EGT sensor mount. 
1 x 4 cell 3300Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Glowplug connector. 
1 x Thermo sensor (K-type). 
1 x Glowplug wrench. 
1 x Glow plug Rossi 8 (spare). 
1 x Manual Titan E-start. 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x 2 meter Festo PP6 tube. 
1 x Fuel filter. 

 

Complete engine set Titan Air-start + EDT. (propane start)

The Titan Air-start set contains the following:
1 x Fully tested Titan Air-start gasturbine. 
1 x Version 2.0 b Electronic Control Unit. 
1 x Solenoid high flow valve for kerosene. 
1 x Solenoid high flow valve for gas. 
1 x Titan fuel pump. 
1 x Rear engine mount. 
1 x Front engine mount + EGT sensor mount. 
1 x 4 cell 3300Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Glowplug connector. 
1 x Thermo sensor (K-type). 
1 x Glowplug wrench. 
1 x Glow plug Rossi 8 (spare). 
1 x Manual Titan E-start. 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x 2 meter Festo PP6 tube. 
1 x Fuel filter. 
1 x Engine Data Terminal. 
1 x EDT charge cable.

 

Complete engine set Titan E-start. (propane start)

The Titan E-start set contains the following:
1 x Fully tested Titan UAV E-start gasturbine. 
1 x Version 2.0 b Electronic Control Unit. 
1 x Solenoid high flow valve for kerosene. 
1 x Solenoid high flow valve for gas. 
1 x Titan fuel pump. 
1 x Rear engine mount. 
1 x Front engine mount + EGT sensor mount. 
1 x 4 cell 3300Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Glowplug connector. 
1 x Thermo sensor (K-type). 
1 x Glowplug wrench. 
1 x Glow plug Rossi 8 (spare). 
1 x Manual Titan E-start. 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x 2 meter Festo PP6 tube. 
1 x Fuel filter. 
 

Complete engine set Titan E-start + EDT. (propane start)

The Titan E-start set contains the following:
1 x Fully tested Titan E-start gasturbine. 
1 x Version 2.0 b Electronic Control Unit. 
1 x Solenoid high flow valve for kerosene. 
1 x Solenoid high flow valve for gas. 
1 x Titan fuel pump. 
1 x Rear engine mount. 
1 x Front engine mount + EGT sensor mount. 
1 x 4 cell 3300Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Glowplug connector. 
1 x Thermo sensor (K-type). 
1 x Glowplug wrench. 
1 x Glow plug Rossi 8 (spare). 
1 x Manual Titan E-start. 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x 2 meter Festo PP6 tube. 
1 x Fuel filter. 
1 x Engine Data Terminal. 
1 x EDT charge cable.

 

Complete engine set Titan E-start. (kerosene start)

The complete set contains
1 x Fully tested Titan E-start gasturbine with kerosene start system. 
1 x Version 2.0 b Electronic Control Unit. 
1 x High flow main solenoide valve for kerosene. 
1 x High flow fuel solenoide valve for ignitor. 
1 x Titan fuel pump. 
1 x Rear engine mount. 
1 x Front engine mount + EGT sensor mount. 
1 x 4 cell 3300Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Thermo sensor (K-type). 
1 x Manual Titan E-start (kerosene). 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x 2 meter Festo PP6 tube. 
1 x Fuel filter. 
1 x Festo T piece for ignitor feed. 

 

Complete engine set Titan E-start + EDT. (kerosene start)

The complete set contains
1 x Fully tested Titan E-start gasturbine with kerosene start system 
1 x Version 2.0 b Electronic Control Unit. 
1 x High flow main solenoide valve for kerosene. 
1 x High flow fuel solenoide valve for ignitor. 
1 x Titan fuel pump. 
1 x Rear engine mount. 
1 x Front engine mount + EGT sensor mount. 
1 x 4 cell 3300Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Thermo sensor (K-type). 
1 x Manual Titan E-start. 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x 2 meter Festo PP6 tube. 
1 x Fuel filter. 
1 x Festo T piece for ignitor feed. 
1 x Engine Data Terminal. 
1 x EDT charge cable.

 

Nike (Nike E-start engines have direct kerosene ignition.)

Complete engine set Nike E-start + EDT. (kerosene start)

Complete engine set Nike E-start + EDT. (kerosene start) 
The complete set contains
1 x Fully tested Nike E-start gasturbine with kerosene start system. 
1 x Version 2.0 b Electronic Control Unit. 
1 x High flow main solenoide valve for kerosene. 
1 x High flow fuel solenoide valve for ignitor. 
1 x Nike fuel pump. 
2 x Rear engine mount. 
1 x Front engine mount 
1 x 4 cell 5200Mah Lithium Polymer battery pack. 
1 x Battery pack charge cable. 
1 x Safety clip for RPM sensor. 
1 x Internal thermo sensor (K-type). 
1 x Manual Nike E-start. 
1 x 3 meter Festo PP3 tube. 
1 x 2 meter Festo PP4 tube. 
1 x 2 meter Festo PP6 tube. 
1 x Fuel filter. 
1 x Festo T piece for ignitor feed. 
1 x Engine Data Terminal. 
1 x EDT charge cable.

 

Optional Equipment

Engine Data Terminal.

** ENGINE DATA TERMINAL** 

The Engine Data Terminal is a low-cost module, consisting of a self-contained 125 x 70 x 30mm unit, with its own internal battery. 

It offers a simple and effective method of monitoring all major functions and parameters during ground running, and permits operators to ensure that everything is functioning correctly before flying. 

The EDT displays the same data as the Telemetry system in real-time mode, on a 4-row 20 character LCD screen, but offers no data storage. 
It is either connected to the serial port of the ECU with a single cable during motor starting or, if using our ASU, then the EDT can be plugged directly into this unit.

 

Manual starter box.

****** Manual starter box ****** 

For starting and cooling down of electric start Mercury, Pegasus,  Olympus, HP and normal types. 

Connects directly to a 12 volt 6 Amp battery and to the electric starter motor. 

When pushing the button the E-starter spins up the shaft of the turbine in 2 stages, this is controlled by the electronics in the manual starter box.

 

Single engine analog control box.

****** Analog control box ****** 

This analog control box works only with our analog ECU, it eliminates 
the use of a Radio Control system to operate the turbine. 

Often this analog control box is used together with the analog ECU to 
operate stationary installed engines.

Dual engine analog control box.

****** Dual analog control box ****** 

This analog control box works only with our analog ECU,s, it eliminates 
the use of a Radio Control system to operate 2 turbines simultaneously. 

Often this analog control box is used together with the analog ECU to 
operate stationary installed engines.

Telemetry Software.

 

 

Spare parts Mercury HP

Electronic Control Unit Mercury HP E, version 2 electric start.

** Version 2 ECU ** ( Fully automatic E-Start and Airstart ) 
Features 
* One or Two channel operation. 
* ECU works on 10 cell Nicad or 4 cell Lipo. (auto detect) 
* Output for fuel solenoide valve. 
* Output for propane solenoide valve. 
* Output for glowplug. 
* Output for E-starter or valve for full automatic airstart. 
* Log file of last 22 min, of run @ 1 seconds interval.(V26) 
* Logged is: 
-> RPM of shaft. 
-> Exhaust Gas Temperature. 
-> Throttle channel. 
-> Switch channel, or throttle trim @ single channel operation. 
-> Fail save condition if occurred. 
-> Number of fail safes during last engine run. 
-> Supply voltage of ECU. 
-> Pump voltage. 
-> Status of ECU (e.g. started up, max RPM set, error messages) 
* At error, last 8 sec. log is availavble in 0.2 seconds intervals. 
* Serial 2400 Baud, rs232 level output. 
* Capable of driving Automatic Startup Unit. 
* Weight 160 gram / 5,4 oz. 
* Fuzzy logic software, for fastest possible throttle response. 
* No adjustments needed. 
* Ridged small ECU housing. 
* All high quality cables with gold plated connectors. 
* Standard \"K type\" EGT probe connector. 
* Own AMT Netherlands design ECU.

 

Fuel pump Mercury HP.

** Mercury fuel pump ** 

High-tech kerosene fuel pump with high flexible cable and gold plated connector. 

The input side has a FESTO PP4 connector, the pressure side a FESTO PP3 connector, flow direction is marked with an arrow on the front side of the pump. 

The fuel pump has a fully enclosed aluminium housing, EMC is internally suppressed with capacitors for a minimum of interference with your RC system. 

In a engine set the fuel pump has a serial number the same as the turbine, weight of fuel pump is 180 Gram / 6,3 oz.

 

Rear engine mount Mercury HP.

** Rear engine mount Mercury HP ** 

Internal diameter of engine mount is 100 mm this is the diameter of the Mercury HP engine. 

The engine mount has two mounting slots for a variable mounting distance with a minimum of 125 mm and a maximum mounting distance of 135 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging.

 

Front engine mount Mercury HP.

** Front engine mount Mercury HP ** 

Internal diameter of engine mount is 100 mm this is the diameter of the Mercury HP engine. 

The engine mount has two mounting slots for a variable mounting distance with a minimum of 125 mm and a maximum mounting distance of 135 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging. 

The engine mount is equipped with a mounting bracket for the EGT sensor. 

 

On-board gas container Mercury HP.

** Internal gas container for Mercury HP ** 
The internal gas container has 3 connections on the top. 
- Input for filling with automatic one way valve. 
- Output to gas valve. 
- 70 % overflow output. 
The top has 3 mounting holes of 3,5 mm. 
Diameter of gas container : 40 mm (1,6 inch) 
Height of gas container * : 52 mm (2,0 inch) 
* Height without connectors on top. 
Read instructions before use of this gas-container. 
 

** Note ** 
AMT Netherlands gas containers have a 70 % overflow output for save filling, a gas-container always should have such a overflow system. Using a retract air-tank can create unsafe and dangerous situation. 

 

Spare parts Pegasus HP

Electronic Control Unit Pegasus HP E, version 2 electric start.

** Version 2 ECU ** ( Fully automatic E-Start and Airstart ) 
Features 
* One or Two channel operation. 
* ECU works on 10 cell Nicad or 4 cell Lipo. (auto detect) 
* Output for fuel solenoide valve. 
* Output for propane solenoide valve. 
* Output for glowplug. 
* Output for E-starter or valve for full automatic airstart. 
* Log file of last 22 min, of run @ 1 seconds interval.(V26) 
* Logged is: 
-> RPM of shaft. 
-> Exhaust Gas Temperature. 
-> Throttle channel. 
-> Switch channel, or throttle trim @ single channel operation. 
-> Fail save condition if occurred. 
-> Number of fail safes during last engine run. 
-> Supply voltage of ECU. 
-> Pump voltage. 
-> Status of ECU (e.g. started up, max RPM set, error messages) 
* At error, last 8 sec. log is availavble in 0.2 seconds intervals. 
* Serial 2400 Baud, rs232 level output. 
* Capable of driving Automatic Startup Unit. 
* Weight 160 gram / 5,4 oz. 
* Fuzzy logic software, for fastest possible throttle response. 
* No adjustments needed. 
* Ridged small ECU housing. 
* All high quality cables with gold plated connectors. 
* Standard \"K type\" EGT probe connector. 
* Own AMT Netherlands design ECU.

 

Fuel pump Pegasus HP

** Pegasus fuel pump ** 

High-tech kerosene fuel pump with high flexible cable and gold plated connector. 

The input side has a FESTO PP4 connector, the pressure side a FESTO PP3 connector, flow direction is marked with an arrow on the front side of the pump. 

The fuel pump has a fully enclosed aluminium housing, EMC is internally suppressed with capacitors for a minimum of interference with your RC system. 

In a engine set the fuel pump has a serial number the same as the turbine, weight of fuel pump is 180 Gram / 6,3 oz.

 

Rear engine mount Pegasus HP

** Rear engine mount Pegasus HP ** 

Internal diameter of engine mount is 120 mm this is the diameter of the Pegasus HP engine. 

The engine mount has two mounting slots for a variable mounting distance with a minimum of 150 mm and a maximum mounting distance of 160 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging. 

 

Front engine mount Pegasus HP.

** Front engine mount Pegasus HP ** 

Internal diameter of engine mount is 120 mm this is the diameter of the Pegasus HP engine. 

The engine mount has two mounting slots for a variable mounting distance with a minimum of 150 mm and a maximum mounting distance of 160 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging. 

The engine mount is equipped with a mounting bracket for the EGT sensor. 

 

On-board gas container Pegasus HP.

** Internal gas container for Pegasus HP ** 
The internal gas container has 3 connections on the top. 
- Input for filling with automatic one way valve. 
- Output to gas valve. 
- 70 % overflow output. 
The top has 3 mounting holes of 3,5 mm. 
Diameter of gas container : 40 mm (1,6 inch) 
Height of gas container * : 77 mm (3,0 inch) 
* Height without connectors on top. 
Read instructions before use of this gas-container. 

** Note ** 
AMT Netherlands gas containers have a 70 % overflow output for save filling, a gas-container always should have such a overflow system. Using a retract air-tank can create unsafe and dangerous situation. 

 

Spare parts Olympus HP

 

Electronic Control Unit Olympus HP E, version 2 electric start.

** Version 2 ECU ** ( Fully automatic E-Start and Airstart ) 
Features 
* One or Two channel operation. 
* ECU works on 10 cell Nicad or 4 cell Lipo. (auto detect) 
* Output for fuel solenoide valve. 
* Output for propane solenoide valve. 
* Output for glowplug. 
* Output for E-starter or valve for full automatic airstart. 
* Log file of last 22 min, of run @ 1 seconds interval.(V26) 
* Logged is: 
-> RPM of shaft. 
-> Exhaust Gas Temperature. 
-> Throttle channel. 
-> Switch channel, or throttle trim @ single channel operation. 
-> Fail save condition if occurred. 
-> Number of fail safes during last engine run. 
-> Supply voltage of ECU. 
-> Pump voltage. 
-> Status of ECU (e.g. started up, max RPM set, error messages) 
* At error, last 8 sec. log is availavble in 0.2 seconds intervals. 
* Serial 2400 Baud, rs232 level output. 
* Capable of driving Automatic Startup Unit. 
* Weight 160 gram / 5,4 oz. 
* Fuzzy logic software, for fastest possible throttle response. 
* No adjustments needed. 
* Ridged small ECU housing. 
* All high quality cables with gold plated connectors. 
* Standard \"K type\" EGT probe connector. 
* Own AMT Netherlands design ECU.

 

Fuel pump Olympus HP.

** Olympus fuel pump ** 
High-tech kerosene fuel pump with high flexible cable and gold plated connector. 
The input side has a FESTO PP4 connector, the pressure 
side a FESTO PP3 connector, flow direction is marked with an arrow on the front side of the pump. 
The fuel pump has a fully enclosed aluminium housing, EMC is internally suppressed with capacitors for a minimum of interference with your RC system. 
In a engine set the fuel pump has a serial number the same as the turbine, weight of fuel pump is 180 Gram / 6,3 oz.

 

Rear engine mount Olympus HP.

** Rear engine Olympus HP ** 

Internal diameter of engine mount is 130 mm this is the diameter of the Olympus HP engine. 

The engine mount has two mounting slots for a variable mounting distance with a minimum of 160 mm and a maximum mounting distance of 170 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging. 
 

Front engine mount Olympus HP.

** Front engine mount Olympus HP ** 

Internal diameter of engine mount is 130 mm this is the diameter of the Olympus HP engine. 

The engine mount has two mounting slots for a variable mounting distance with a minimum of 160 mm and a maximum mounting distance of 170 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging. 

The engine mount is equipped with a mounting bracket for the EGT sensor. 

 

Solenoide valve Fuel Olympus HP (high flow)

 

*** Olympus HP main fuel solenoid *** 

This high flow fuel solenoide valve is used in the fuel line between fuel pump and engine for direct kerosenstart engines and propane start engines

 

 

 

 

 

 

Ignitor solenoide valve.

 

*** Titan & Olympus HP ingitor valve *** 

This ignitor solenoide valve is used beween fuel pump and igniter and is used with Olympus HP and Titan engines.

Solenoide valve Propane Olympus HP

 

*** Propane solenoide valve *** 

This solenoide vale is use with Olympus HP and Titan propane start engines.

On-board gas container Olympus HP.

 

** Internal gas container for Olympus HP ** 
The internal gas container has 3 connections on the top. 
- Input for filling with automatic one way valve. 
- Output to gas valve. 
- 70 % overflow output. 
The top has 3 mounting holes of 3,5 mm. 
Diameter of gas container : 40 mm (1,6 inch) 
Height of gas container * : 102 mm (4,0 inch) 
* Height without connectors on top. 
Read instructions before use of this gas-container. 
 

** Note ** 
AMT Netherlands gas containers have a 70 % overflow output for save filling, a gas-container always should have such a overflow system. Using a retract air-tank can create unsafe and dangerous situation. 

Spare parts Titan

Electronic Control Unit Titan, version 2b electric start.

** Version 2b ECU ** ( Fully automatic E-Start and Airstart ) 
Features 
* One or Two channel operation. 
* ECU works on 12 volt. 
* Output for fuel solenoide valve. 
* Output for propane solenoide valve. 
* Output for glowplug. 
* Output for E-starter or valve for full automatic airstart. 
* Log file of last 22 min, of run @ 1 seconds interval.(V29) 
* Logged is: 
-> RPM of shaft. 
-> Exhaust Gas Temperature. 
-> Throttle channel. 
-> Switch channel, or throttle trim @ single channel operation. 
-> Fail save condition if occurred. 
-> Number of fail safes during last engine run. 
-> Supply voltage of ECU. 
-> Pump voltage. 
-> Status of ECU (e.g. started up, max RPM set, error messages) 
* At error, last 8 sec. log is availavble in 0.2 seconds intervals. 
* Serial 2400 Baud, rs232 level output. 
* Capable of driving Automatic Startup Unit. 
* Weight 350 gram / 12,3 oz. 
* Fuzzy logic software, for fastest possible throttle response. 
* No adjustments needed. 
* Ridged aluminium ECU housing. 
* All high quality cables with gold plated connectors. 
* Standard \\\"K type\\\" EGT probe connector. 
* Own AMT Netherlands design ECU.

 

Fuel pump Titan.

** Titan fuel pump ** 

High-tech kerosene fuel pump with high flexible cable and gold plated connector. 

The input side has a FESTO PP6 connector, the pressure 
side a FESTO PP4 connector, flow direction is marked with 
an arrow on the front side of the pump. 

The fuel pump has a fully enclosed aluminium housing, EMC 
is internally suppressed with capacitors for a minimum of 
interference with your RC system. 

In a engine set the fuel pump has a serial number the same 
as the turbine, weight of fuel pump is 460 Gram / 16,2 oz.

 

Fuel filter Titan (K&N)

*** Titan fuel filter *** 

This high flow fuel filter has two PP6 connections and is for use between the Titan fuel pump and fuel system. 

High performance 4 cell Lithium Polymer battery pack.(4S 3300 Mah)

High performance Lithium Polymer battery pack. 

Capacity : 3300 Ma/hour 
Max current : 25C (92.5 Amp) 
Peak current: 50C (185 Amp) 

For use with Titan, but also suitable for all other type of AMT engines. 

Dimensions : 150 x 40 x 30 mm 
Weight : 400 gram

 

Front engine mount Titan.

** Front engine mount Titan ** 

Internal diameter of engine mount is 147 mm this is the diameter of the Titan UAV engine. 


The engine mount has two mounting slots for a variable mounting distance with a minimum of 160 mm and a maximum mounting distance of 170 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging. 

The engine mount is equipped with a mounting bracket for the EGT sensor. 

 

Rear engine mount Titan.

** Rear engine mount Titan ** 

Internal diameter of engine mount is 147 mm this is the diameter of the Titan engine. 

The engine mount has two mounting slots for a variable mounting distance with a minimum of 160 mm and a maximum mounting distance of 170 mm. 

The straps are made of stainless steel and are laser-cut for high precision, the internal high temp rubber prevents the engine for damaging. 

 

Thermo sensor Titan.

** Thermo sensor Titan ** 

This is a K-type 1,5 mm (1/16 inch) thik INCONEL thermo sensor with a sensor length of 170 mm (6,5 inch). 
 

Solenoide valve Fuel Titan (high flow)

*** Solenoide valve Fuel Titan (high flow) *** 

This high flow fuel solenoide valve is used in the fuel line between fuel pump and engine for direct kerosenstart engines and propane start engines.

Ignitor solenoide valve

*** Titan & Olympus HP ingitor valve *** 

This ignitor solenoide valve is used beween fuel pump and igniter and is used with Olympus HP and Titan engines.

Solenoide valve Propane Titan (high flow)

*** Propane solenoide valve *** 

This solenoide vale is use with Olympus HP and Titan propane start engines.

Sundries

Accupack charge cable

**Accupack charge cable ** 

High flexible cable with gold plated connectors on both sides of the cable, the length of the cable is 90 cm / 3 feet. 

Different length cable on request.

Glowplug connector Pegasus HP / Mercury HP / Olympus HP / Titan

Glowplug connector for use with propane start engines with the use of Rossi R8 glowplugs. 
 

Thermo sensor Mercury HP.

** Thermo sensor Mercury HP ** 

This is a K-type 1,5 mm (1/16 inch) thik INCONEL thermosensor with a sensor length of 125 mm (5 inch). 

The sensor is equipped with a high flexible Nikkel/Chroom wire cable with silicon isolation, the sensor has a cable length of 1 meter (3,3 feet). 

The EGT sensor has a standard K-type male connector for connecting to our V1 and V2 type of ECU. 

Different length of extension cables on request.

Thermo sensor Pegasus HP/Olympus HP.

** Thermo sensor Pegasus HP/Olympus HP ** 

This is a K-type 1,5 mm (1/16 inch) thik INCONEL thermosensor with a sensor length of 160 mm (5,5 inch). 

The sensor is equipped with a high flexible Nikkel/Chroom wire cable with silicoon isolation, the sensor has a cable length of 1 meter (3,3 feet). 

The EGT sensor has a standard K-type male connector for connecting to our V1 and V2 type of ECU. 

Different length of extension cables on request.

Glowplug wrench

*** Glowplug wrench *** 

This glowplug wrench is used to replace the glowplug of propane start engines. 

Glow plug ( Rossi 8 ).

 

Lithium polymer battery 4S 2500 Mah.

 

** Lithium polymer battery ** 
This 4 cell 2500 mAh lithium polymer battery can be used with our recent V2 ECU and all our engine types. 
Weight of the battery is 282 gram / 9.9 oz 
Size: (L-W-H) 105 x 35 x 34 mm 
** Safety tips ** 
-Use only battery chargers special made to charge LIPO. 
-Observe the charging current (max.2 Amp) and the charging 
voltage when charging. 
-Protect from mechanical forces. 
-Do not under any circumstances open or cut open the batteries. 
-Do not throw into a fire, keep away from children. 
-Do not short circuit the batteries under any circumstances. 
-Do not discharge 10.0V (2.5V per cell), or they will be completely 
defective. 
-Do not operate the batteries below -5蚓, since the capacity decreases sharply at minus temperatures. 
-Protect the batteries from the effects of heat, install away from hot components (e.g. exhaust) 
-Charge the batteries before storing (e.g. in winter). 
-Do not store in discharged state. 
-Where possible, do not leave the batteries unattended when charging. 
-If lithium polymer batteries become involved in a fire 
(e.g. a crashed burning jet), NEVER extinguish with water; 
use a powder extinguisher instead! Lithium has a very severe 
reaction with water. 
 

Lithium polymer battery 4S 3300 Mah.

 

** Lithium polymer battery ** 
This 4 cell 3300 mAh lithium polymer battery can be used with our recent V2 ECU and all our engine types. 
Weight of the battery is 350 gram / 12.3 oz 
Size: (L-W-H) 105 x 35 x 34 mm 
** Safety tips ** 
-Use only battery chargers special made to charge LIPO. 
-Observe the charging current (max.2 Amp) and the charging voltage when charging. 
-Protect from mechanical forces. 
-Do not under any circumstances open or cut open the batteries. 
-Do not throw into a fire, keep away from children. 
-Do not short circuit the batteries under any circumstances. 
-Do not discharge 10.0V (2.5V per cell), or they will be completely 
defective. 
-Do not operate the batteries below -5蚓, since the capacity decreases sharply at minus temperatures. 
-Protect the batteries from the effects of heat, install away from hot components (e.g. exhaust) 
-Charge the batteries before storing (e.g. in winter). 
-Do not store in discharged state. 
-Where possible, do not leave the batteries unattended when 
charging. 
-If lithium polymer batteries become involved in a fire 
(e.g. a crashed burning jet), NEVER extinguish with water; 
use a powder extinguisher instead! Lithium has a very severe 
reaction with water.

 

Lithium polymer battery 4S 5200 Mah.

 

** Lithium polymer battery ** 
This 4 cell 5200 mAh lithium polymer battery can be used with our recent V2 ECU and all our engine types. 
Weight of the battery is 544 gram / 19.2 oz 
Size: (L-W-H) 152 x 49 x 33 mm 
** Safety tips ** 
-Use only battery chargers special made to charge LIPO. 
-Observe the charging current (max.2 Amp) and the charging 
voltage when charging. 
-Protect from mechanical forces. 
-Do not under any circumstances open or cut open the batteries. 
-Do not throw into a fire, keep away from children. 
-Do not short circuit the batteries under any circumstances. 
-Do not discharge 10.0V (2.5V per cell), or they will be completely 
defective. 
-Do not operate the batteries below -5蚓, since the capacity decreases sharply at minus temperatures. 
-Protect the batteries from the effects of heat, 
install away from hot components (e.g. exhaust) 
-Charge the batteries before storing (e.g. in winter). 
-Do not store in discharged state. 
-Where possible, do not leave the batteries unattended when charging. 
-If lithium polymer batteries become involved in a fire 
(e.g. a crashed burning jet), NEVER extinguish with water; use a powder extinguisher instead! Lithium has a very severe reaction with water.

 

Festo PP3 tube 3 Meter.

 

Festo PP4 tube 2 Meter.

 

Festo PP6 tube 2 Meter.

 

C.T.F. Switch.

* C.T.F. Switch * 

This switch is used to \"teach\" the ECU the pulse width of the radio you are using. 

The C.T.F. switch is also used to perform single channel operation and to access all the special features at dual channel operation. 

Kerosene ignitor only.

*** Kerosene_ingitor *** 

This kerosene ignitor is used in Olympus HP and Titan direct kerosene start engines.

Kerosene ingitor complete assembly.

*** Kerosene ingitor assembly *** 

This complete assembly is used in Olympus HP end Titan direct kerosene start engines. 

To mount a special \"C\" wrench in needed.

Festo QST-4.

*** Festo QST-4 *** 

This festo part is used with the Olympus HP kerosene start engine.

QST-F-6-T + QS-F-5H-4

*** QST-F-6-T + QS-F-5H-4 *** 

Theses festo parts are used with the Titan kerosene start engine.

Festo Fuel filter. (Mercury HP / Pegasus HP / Olympus HP)

** Fuel Filter ** 

Check and clean fuel filters at least every 10 litres of fuel if needed. 

AMT NL recommends replacing the fuel filters every 100 litres of fuel or sooner.

Solenoide valve Gas.(Mercury HP / Pegasus HP)

 

Solenoide valve Fuel.(Mercury HP / Pegasus HP)

 

Festo QH-QS-4 (PP3 on/off valve).

 

Festo QH-QS-6 (PP4 on/off valve).

 

Aero Shell 500 turbine oil, quater gallon.

** Aero Shell 500 ** to mix with fuel. 
Several types of fuel can be used with our turbines however, AMT NL recommends that you stick with a fuel type once it has been chosen. It is important to get information about the local availability of your choice of fuel before making this decision. 
Recommended fuel types 
1: JP-4/Kerosene
2: Paraffin
3: Jet A-1
AMT Netherlands gas turbines uses the fuel for lubrication, the fuel must be pre-mixed with 4,5% turbine oil before use. This oil takes care of the lubrication during start-up and power-down sequences. 
 

When a power-down is activated the fuel flow stops and each of the above fuel types will vaporize in the hot turbine. 
 

At that moment the oil takes care of the lubrication. This remaining oil also lubricates the turbine during the next start-up sequence. 
 

We at AMT Netherlands developed this kind of lubrication for small gas turbines and use this method of lubrication since 1994, most turbine manufactures use this method now.


[首頁] [翱翔天際] [Mercury HP] [Pegasus HP] [Olympus HP] [Titan] [Nike] [Optional Equipment] [Olympus university] [Turbines compared] [Complete package] [Version 2 ECU]

新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一

公司電話:+886-2-2695-8906(代表號)

 02-2695-6755, 02-2695-7011, 02-2695-7033

公司傳真:+886-2-26958911

利偉 分機:21  jaco@bentech-taiwan.com

上次更新日期: 2017年12月29日。